Bonjour,
j'ai fait des combinaisons et modifications pour obtenir un direct drive avec un bondtech sur une cr-10s.
il y a une version pour le clone E3D de creality avec métal et une sans.
pour le poids je recommande la version sans métal.
le pack comporte :
les supports pour le direct drive
des supports pour le câble drag (vis)
des supports webcam + fixation pour c270
pour l'assemblage du direct drive V1 (obsolète, utilisé la version 2) je vous laisse vous référez a :
https://www.thingiverse.com/thing:2913260
https://www.thingiverse.com/thing:2494642
pour les fixations du drag chain coté direct drive:
pièce a assembler :
support engine.stl
drag chain support engine.stl
vis :
M3 X 8 avec boulon
note : vis coté "support engine.stl"  et boulon coté "drag chain support engine.stl"
pour les fixations du drag chain coté moteur X :
pièce a assembler :
support for drag chain and support cam.stl
arm cable drag chain.stl
support cam base.stl (optionnelle)
vis :
M4x12 avec boulon
note : boulons a l’intérieur de "support…

Hi everyone, I've made a little modification to the fan duct of this very good e3d v6 modular mount (https://www.thingiverse.com/thing:2494642). I just want to reduce the air flow hitting the nozzle so I've tried to extend the mouth of the original duct to see if it works better. I've not tested it yet, but I upload it if someone is interested to try it. The part with bltouch mount needs support to print fine

CR-10 Heavy Duty Modular E3D V6 Mount
I have started a Shapeways shop where you can get these parts printed. I have special versions of the V6 mount designed for Aluminium. At the moment the shop doesn't have much as I'm still setting it up. It's also expensive to get aluminum prints but its an option for those who want it parts that will survive in an enclosure. If no one uses it i will get rid of it. Im just testing the idea outhttps://www.shapeways.com/shops/chito-1
This is a mount for the V6 hot-end by E3D that is stronger and more rigid than some of the mounts that are out there. This mount also comes with an array of possible options for any extra functionality as attachments on the sides.
The minimum you will need to print out is the body and one of the faceplates. There are a variety of wings for different combinations, additions and customizations.
NOTE: Only left side parts are in the library of wings. To print a wing for the right side simply mirror the part in your slicer.
Current modules
5015 fan…

Slim and stable mount for BlTouch
Offset: X26 Y-23

This is a Beta of a revision of my Bondtech/ V6 direct drive, incorporating a hotend shroud and duct for any 40mm axial fan.
NB. This is not compatible with the stock extruder stepper motor. You will need a pancake stepper or it'll hit the X limit switch housing.
In  response to feedback the following improvements have been implemented:
All sections of the mounting plate are thicker and stronger. There is also a clamp to secure the mounting plate to the X carriage plate, eliminating any movement due to the moment of the stepper and extruder.
The duct is now secured from both sides eliminating any twist.
The 5015 blower is now secured with both fixings.
There is a notch to accommodate the fixing lugs on the bodies of some 5015 blowers.
The BLTouch can be removed and replaced with a single bolt without disturbing the Z offset.
The effective part cooling nozzle geometry remains identical.
Hardware:
M3 x 8mm  6off
M3 x 10mm 4off
M3 x 12mm 2off
M3 x 12mm 2off
M3 x 25mm 2off
M3 Nyloc nut 10off
M3 nut (standard) 1off…